Showing posts with label Nuvo Hybrid Ink Pads. Show all posts
Showing posts with label Nuvo Hybrid Ink Pads. Show all posts

Monday, April 2, 2018

Normal Is Boring!


  
Fashionista is one of the new stamp sets released in March from Sparkle N Sprinkle.  I was fortunate enough to be the colorist for the digi version.  After coloring the image with Copic markers, I felt this image would have more of a punch if I kept clean lines for the card base.


The image was die cut using the Tonic Studios Mixed Edge Rectangle Basics layering die set.  This is one of my go to sets as it is so versatile and has both straight and scalloped edges.  Glue Dots-Pop Up Dots were used to adhere both the focal image to the card base and the sentiment to the focal image.


Her shoes, the straps of her purse, and the dots on her scarf were given extra bling by using Priceless Peacock glitter.  The heart on her purse has added dimension by using Nuvo Crystal Drops (Red Berry).  Glossy Accents gives her sunglasses added shine.

The sentiment was stamped using the Poppy Red Nuvo Hybrid Ink Pad.  After stamping it with the Tim Holtz Stamp Platform, I immediately added Clear Detail embossing powder and heat set it.  (I use so much of the Clear Detail, that I get it in the Economy size 😊.)

If you frequent my blog very often, you'll notice I do this on almost every sentiment I stamp.  It gives a bit more shine and dimension to the stamped sentiments.  I also added a little more Priceless Peacock glitter to the center of the arrow.  Once my sentiment was complete, I cut the words into three sections and added a some Poppy Red ink to the edges.  Sequins from the Nuvo Golden Years Confetti pack were added for a bit more sparkle.


Products used:
Glitter: Priceless Peacock (G1015)
Embossing Powder: Clear Detail (EP280)
Nuvo Golden Years Confetti pack (Diamond)
Copic markers



Until next time....



-->

Friday, March 16, 2018

Fancy Clover



Today I'd like to share with you a perfect card  for St. Patrick's Day tomorrow.  I used the Fancy Clover two piece die set from Cheapo Dies to create this very quick and easy card.



I die cut each piece from white cardstock and used the glueless glitter technique and Clear embossing powder to add Sparkle N Sprinkle's Elegant Emerald glitter to each piece.  You could have also used a double sided adhesive sheet as well.

The double sentiment is a stamp set from Sparkle N Sprinkle (Luck of the Irish Enchantress) and was stamped with a Nuvo Hybrid Ink Pad (Black Shadow) and was heat embossed with Clear embossing power for added dimension and gloss.

The bottom of the card base was cut using a deckle cutter and I added a strip of patterned cardstock to the bottom.

This super quick CAS card is perfect for St. Patty's Day.  It may be simple, but the bling from the glitter is amazing!

Be sure to visit the Cheapo Dies Blog regularly to see what the rest of the team has created for your inspiration.

Monday, March 5, 2018

Be Yourself



Today I'm showcasing one of the new March Release stamp sets called Amazing You - Paisley Elephant from Sparkle N Sprinkle.

SNS is starting something new this month, beginning today.  Instead of a traditional blog hop, the designers will begin showcasing the new sets on the 5th of each month and a winner of a $20 gift certificate to SNS will be chosen at the end of each month.  The winner will be chosen from comments left on both the SNS Blog and a Mystery Designer's blog.



Although this isn't my normal style, it was fun creating this mixed media card.  I started out by applying various Distress Oxides to white cardstock and then spritzing it with water.  After this dried, I used my Tim Holtz Stamp Platform and a Nuvo Hybrid Ink Pad (Black Shadow) to stamp my image onto my colored background.  Immediately after stamping the image, I covered it with Clear Detail embossing powder and heat set it.


The smallest die from the Swirling Frame die set was used for the sentiment.  I used the same process (Distress Oxides, Stamp Platform, Nuvo Hybrid Ink, Clear Detail) as above to create this tag.  This is pop dotted on top of the card base for a bit of dimension.

After die cutting the next layer using the Sizzix die (Damask), I set it aside to work on the card base.  The card base was die cut using the largest die from the Tonic Studios die set (Swirling Frame) and was die cut from a Super Adhesive Sheet.

After removing the protective sheet, I adhered the mat and my focal image to the adhesive sheet.  I couldn't decide whether I wanted to use glitter or gilding flakes, so I experimented and used both. 😀  I began by randomly adding the Nuvo Gilding Flakes (Radiant Gold) to certain areas and then I covered the rest of the exposed area with Collegiate Garnet glitter.  When I was removing the excess, the gilding flakes co-mingled with the glitter and I thought they looked pretty good together.  I saved this combo in a separate container and will use it in a future project.  (On a side note, if you decide to do this too, remember that the flakes are much lighter than the glitter so you will need to stir it up before using it to get an even distribution of glitter and gilding flakes.)

The focal point wasn't as prominent as I would like after completing the card base so I created a frame around the elephant using 1/8" Tear-ific Tape.  Once the adhesive was exposed, I covered it with Black Diamond microfine glitter.  This was the extra pop that it needed.

I have to say that the photos don't quite do this card justice.  The dark jewel tones of the Collegiate Garnet glitter and the bright pops of gold from the Gilding Flakes are much more vibrant in person.

Thanks for taking a look today and be sure to leave a comment both here and on my post on the SNS Blog for a chance to go shopping at Sparkle N Sprinkle.  No one knows who the Mystery Designer is this month (and it might just be me).  There will be new projects on the SNS Blog every day for your inspiration and for increasing your chances of winning.  Good luck!


Products:
Glitter: Collegiate Garnet (G1114); Black Diamond (GM2046)
Embossing Powder: Clear Detail (EP280)
Dies: Tonic Studios (Swirling Frame); Sizzix (Damask)
Nuvo Hybrid Ink Pad (Black Shadow) 
Distress Oxides (Seedless Preserves, Fossilized Amber, Candied Apple)





Friday, March 2, 2018

Love Machine



Today I'd like to share a tag/card combo that uses the Love Machine die from Cheapo Dies.  My first thought about this die was that it would be great for Valentines and anniversaries, but I decided to go outside the box and created a birthday card.  It's so easy to personalize the little hearts that are part of this nine piece die set.

To start out, I die cut the entire set from white cardstock and then began to color the various pieces using different mediums.  The base and top were covered with Morning Glory embossing powder from Sparkle N Sprinkle, the globe was covered with a Nuvo glitter marker (Ember Glow pack), and the  black rectangle was colored with a Copic marker and then Glossy Accents added on top.  All the hearts were colored with various Copic markers.

The tag base was given color by applying three different colors of Nuvo Embellishment Mousse (Cosmic Brown, Spring Green, Lilac Lavender) to the surface using a Marshmallows 3 (a type of dauber that I love).

The sentiment is part of a rubber stamp set by Sparkle N Sprinkle (Balloon Bunch) and was stamped with Nuvo Hybrid Ink (Black Shadow) and heat embossed with Clear embossing powder.

The glitter ribbon was created by taking a piece of 1/4" Tear-ific tape and adding Butterscotch microglitter to both sides.

A piece of patterned cardstock was used for the base and the edges were distressed for a more casual look. 

Be sure to visit the Cheapo Dies Blog regularly to see what the rest of the team has created for you.